/mcpStep 3 Perform the following steps if you want to create a new phone button template; otherwise, proceed to the next step. a) Select a default template for the model of phone and click Copy. b) In the Phone Button Template Information field, enter a new name for the template. c) Click Save. Step 4 Perform the following steps if you want to add phone buttons to an existing template. a) Click Find and enter the search criteria. b) Choose an existing template. Step 5 From the Line drop-down list, choose feature that you want to add to the template. Step 6 Click Save. Step 7 Perform one of the following tasks: • Click Apply Config if you modified a template that is already associated with devices to restart the devices. • If you created a new softkey template, associate the template with the devices and then restart them. Associate a Phone Button Template with a Phone Use this procedure to associate the phone button template that you created for the Record button of the phone. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find to display the list of configured phones. Step 3 Choose the phone to which you want to add the phone button template. Step 4 In the Phone Button Template drop-down list, choose the phone button template that contains the new feature button. Step 5 Click Save. A dialog box is displayed with a message to press Reset to update the phone settings. Configure a Record Softkey Use this procedure to add a Record softkey to the phone, if your phone uses softkeys. The Record softkey is only available in the Connected call state for the Cisco Chaperone Phone with Feature Hardkeys template. Procedure Purpose Command or Action Configure a softkey template that includes the Record softkey. Configure a Softkey Template for Recording, on page 140 Step 1 Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 139 Monitoring and Recording Associate a Phone Button Template with a Phone