/mcpb) Choose an existing template. Step 5 From the Line drop-down list, choose feature that you want to add to the template. Step 6 Click Save. Step 7 Perform one of the following tasks: • Click Apply Config if you modified a template that is already associated with devices to restart the devices. • If you created a new softkey template, associate the template with the devices and then restart them. Associate a Manager Assistant Button Template with a Phone Before you begin Configure a Phone Button Template for Manager Assistant, on page 184 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find to display the list of configured phones. Step 3 Choose the phone to which you want to add the phone button template. Step 4 In the Phone Button Template drop-down list, choose the phone button template that contains the new feature button. Step 5 Click Save. A dialog box is displayed with a message to press Reset to update the phone settings. Configure Manager and Assign Assistant for Shared Line Mode Procedure Step 1 From Cisco Unified CM Administration, choose User Management > End User. Step 2 Click Find. The search result displays all the end users that are configured in Unified Communications Manager. Step 3 From the Related Links drop-down list, choose Manager Configuration and click Go. Step 4 Check the Automatic Configuration check box to automatically configure the softkey template and Auto Answer with Speakerphone for intercom line for the manager phone based on the Cisco IP Manager Assistant service parameters. Note Automatic Configuration for intercom applies only when the Unified Communications Manager Assistant intercom feature is used for the Cisco Unified IP Phones 7940 and 7960. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 185 Call Center Features Associate a Manager Assistant Button Template with a Phone