/mcpPurpose Command or Action Configures a remote destination that is a virtual device that represents a mobile device where Configure a Remote Destination, on page 24 Step 4 the user can be reached (for example, a home office phone, or a mobile phone on a cellular network). The remote destination carries many of the same settings as the user's desk phone. Optional. Controls which calls can ring which remote destinations, and at which times of day. Configure an Access List, on page 25 Step 5 The access list filters callers based on the Caller ID and can either allow calls or block calls from the caller during that remote destination's ring schedule. Configure Softkey Template for Mobility Use this procedure to configure a softkey template that includes the Mobility softkey. The softkey will be enabled for all phones that use this template. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Softkey Template. Step 2 To create a new softkey template do the following. Otherwise, proceed to the next step. a) Click Add New. b) Select a default template and click Copy. c) In the Softkey Template Name field, enter a new name for the template. d) Click Save. Step 3 To add mobility softkeys to an existing template. a) Enter search criteria and click Find. b) Choose an existing template. Step 4 (Optional) Check the Default Softkey Template check box if you want to designate this softkey template as the default softkey template. Note If you designate a softkey template as the default softkey template, you cannot delete it unless you first remove the default designation. Step 5 Click Save. Step 6 From the Related Links drop-down list, choose Configure Softkey Layout and click Go. Step 7 From the Select a Call State to Configure drop-down list, choose the call state for which you want to add the softkey. Typically, you will want to add the softkey for both the OnHook and Connected call states. Step 8 From the Unselected Softkeys list, choose the Mobility softkey and use the arrows to move the softkey to the Selected Softkeys list. Use the up and down arrows to change the position of the new softkey. Step 9 To display the softkey in additional call states, repeat the previous step. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 21 Remote Worker Features Configure Softkey Template for Mobility