McDewey

• On—When you select this option, the users will receive a stutter dial tone when the handset is off hook . • Default—When you select this option, the phone uses the default that was set at the system level. Step 4 Configure the remaining fields in the Directory Number Configuration window. See the online help for more information about the fields and their configuration options. Step 5 Click Save. Configure Audible Message Waiting Indicator for a SIP Profile Follow these steps to configure Audible Message Waiting Indicator (AMWI) for a SIP profile. The AMWI setting on an individual SIP profile overrides the clusterwide setting. Note Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > SIP Profile. The Find and List SIP Profiles window appears. Step 2 Enter the search criteria to use and click Find. The window displays a list of SIP profiles that match the search criteria. Step 3 Click the SIP profile that you want to update. The SIP Profile Configuration window appears. Step 4 Check the Stutter Message Waiting check box to activate stutter dial tone when the phone is off hook and a message is waiting. Step 5 Click Save. Step 6 Click Apply Config. Audible Message Waiting Indicator Troubleshooting Audible Message Waiting Indicator Is Not Heard on the Phone Problem Phone does not play stutter dial tone to notify the user of new voice messages. If the user uses an SCCP phone, check the following: • Ensure that the phone firmware release is 8.3(1) or later. • Check the AMWI setting for the phone and the line on which the user went off hook. • Verify that the Cisco CallManager service is running on the server. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 205 Voice Messaging Features Configure Audible Message Waiting Indicator for a SIP Profile