/mcpDescription Field Select one of the following options from the drop-down list: • True—The user that invokes the iDivert feature can divert an incoming call only to his own voice mailbox. This is the default setting. • False—Immediate Divert allows diversion of an incoming call to either the voice mailbox of the original called party or to the voice mailbox of the user that invokes the iDivert feature. Use Legacy Immediate Divert Select one of the following options from the drop-down list: • True—Immediate Divert diverts calls to voicemail systems that can be reached over QSIG, SIP, and QSIG-enabled H.323 devices. • False—Immediate Divert does not support access to voicemail systems over QSIG or SIP trunks. This is the default setting. Allow QSIG During iDivert Enter a number from 5 to 30 (inclusive) to determine the time given to the iDivert softkey user to choose the party to whom to divert a call. If the user does not choose a party, the call remains connected. The default value for this service parameter is 5 seconds. Immediate Divert User Response Timer Configure a Softkey Template for Immediate Divert To divert incoming calls or outgoing calls, configure a softkey template and assign the iDivert softkey to that template. You can configure the iDivert softkey in the following call states: • Connected • On hold • Ring in Immediate Divert supports the following call states: • For incoming calls: • Call offering (shown as Ring In on the softkey template). • Call on hold • Call active • For outgoing calls: • Call on hold • Call active Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 210 Voice Messaging Features Configure a Softkey Template for Immediate Divert