/mcpProcedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Perform one of the following tasks: • Click Find and select an existing phone to modify the settings. • Click Add New and choose a phone from the Phone type drop-down list to add a new phone. Step 3 Click Next. Step 4 From the SoftKey Template drop-down list, choose the mobility softkey template that you configured. Step 5 From the Owner User ID drop-down list, choose the user account on which you enabled mobility. Note You can configure either the Owner User ID or Mobility User ID field. Mobility users are configured for mobility-enabled devices and Owner users are configured for Non-Mobility devices. Configuring both users for the same device is not recommended. Step 6 (Optional) If you are using a Feature Control Policy to enable features, choose the policy from the drop-down list. Step 7 Click Save. Configure a Remote Destination Profile Configures common settings that you want to apply to all the remote destination numbers for a user. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Profile > Remote Destination Profile. Step 2 Click Add New. Step 3 Enter a Name for the profile. Step 4 From the User ID drop-down list, choose the end user to whom this profile applies. Step 5 From the Device Pool drop-down list, select the device pool where this profile should reside. Step 6 Configure the remaining fields in the Remote Destination Profile Configuration window. For more information on the fields and their configuration options, see Online Help. Step 7 Click Save. Step 8 Under Association Information, click Add a New DN. Step 9 In the Directory Number field, add the directory number of the user's desk phone. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 23 Remote Worker Features Configure a Remote Destination Profile