/mcpConfigure Intelligent Session Control Configure the system so that inbound calls to a remote destination are rerouted to an associated enterprise number, if one is available. This provides automatic call anchoring within the enterprise for mobility calls, providing cost savings and added Unified Communications functionality. Procedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. Step 2 From the Server drop-down list, choose a Cisco Unified Communications Manager node. Step 3 From the Service drop-down list, choose Cisco CallManager. Step 4 Under Clusterwide Parameters (Feature - Reroute Remote Desination Calls to Enterprise Number) set the following service parameters: • Reroute Remote Destination Calls to Enterprise Number—To enable Intelligent Session Control, set this parameter to True. • Ring All Share Lines—Set the value of the parameter to True. If Intelligent Session Control is enabled, and this service parameter is also enabled, the system anchor calls to remote destinations within the enterprise, and will also ring all the user's shared lines. • Ignore Call Forward All on Enterprise DN—This parameter applies only to outgoing calls to a remote destination when Intelligent Session Control is enabled. By default, this parameter is set to True. Step 5 Click Save. Configure Mobility Service Parameters Use this procedure to configure optional Mobility-related service parameters. Procedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. Step 2 From the Server drop-down list, choose the publisher node. Step 3 From the Service drop-down list, choose Cisco CallManager. Step 4 Configure any service parameters that you want to edit. The Mobility-related parameters are listed under the following headings. For help descriptions, click the parameter name: • Clusterwide Parameters (System - Mobility) • Clusterwide Parameters (System - Mobility Single Number Reach Voicemail) • Clusterwide Parameters (Feature - Reroute Remote Destination Calls to Enterprise Number) Step 5 Click Save. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 29 Remote Worker Features Configure Intelligent Session Control