McDewey

Configure BLF Auto Pickup Before you begin Configure Auto Call Pickup, on page 366 Procedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. Step 2 From the Server drop-down list, choose the server that is running the Cisco CallManager service. Step 3 From the Service drop-down list, choose Cisco CallManager. Step 4 Configure values for the following clusterwide service parameters. • BLF Pickup Audio Alert Setting of Idle Station—Select True or False from the drop-down list to enable or disable automatic call answering for call pickup groups. The default value for this service parameter is False. • BLF Pickup Audio Alert Setting of Busy Station—If the Auto Call Pickup Enabled service parameter is False, enter a value from 12 to 300 (inclusive). This parameter controls the time that a call takes to get restored if the call is picked up but not answered by using call pickup, group call pickup, or other group call pickup. Configure Call Pickup Phone Buttons Procedure Purpose Command or Action Add Call Pickup feature to the phone button template. Configure Call Pickup Phone Button Template, on page 367 Step 1 Associate Call Pickup Button Template with Phone, on page 368 Step 2 Configure BLF Speed Dial Number for the BLF Call Pickup Initiator, on page 369 Step 3 Configure Call Pickup Phone Button Template Follow these steps to add Call Pickup feature to the phone button template. Before you begin Configure Automatic Call Answering, on page 366 Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 367 Receiving Calls Configure BLF Auto Pickup