/mcp• Cisco Unified Communications Manager Locale Installer (if you want to use non-English phone locales or country-specific tones). • Any phone that runs either SCCP or SIP. Device Mobility Configuration Task Flow Complete these tasks to configure device mobility. Procedure Purpose Command or Action Enables device support through a clusterwide service parameter, or within the Phone Configuration window of an individual device. Enable device mobility at the device level by completing either of these tasks: Step 1 • Enable Device Mobility Clusterwide, on page 48 • Enable Device Mobility for Individual Devices, on page 49 Set up the physical locations that you will assign to your device pools. Configure a Physical Location, on page 49 Step 2 A device mobility group is a logical grouping of sites with similar dialing patterns. Configure a Device Mobility Group, on page 50 Step 3 Assign the physical location, device mobility group, and other device mobility-related Configure a Device Pool for Device Mobility, on page 50 Step 4 information to device pools that will be used for device mobility. Assign the IP subnets where roaming devices can register and the device pools that can be assigned to those roaming devices. Configure Device Mobility Information, on page 51 Step 5 Enable Device Mobility Clusterwide Use the following procedure to configure a service parameter that sets the default device mobility setting to On for all phones clusterwide except where there is an overriding configuration in that phone's Phone Configuration. Procedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. Step 2 From the Server drop-down list, choose the node that is running the Cisco CallManager service. Step 3 From the Service drop-down list, choose Cisco CallManager Service. Step 4 Under Clusterwide Parameters (Device - Phone), set the Device Mobility Mode service parameter to On. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 48 Remote Worker Features Device Mobility Configuration Task Flow