/mcpProcedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. The Find and List Phones window appears. Step 2 Choose the phone to which you want to add the softkey template. The Phone Configuration window appears. Step 3 From the Softkey Template drop-down list, choose the template that contains the new softkey. Step 4 Click Save. A dialog box appears with a message to press Reset to update the phone settings. Configure Phones for Hunt Group Use this procedure to configure phones to automatically log in to or log out of hunt groups and hunt lists. Before you begin Ensure the phone directory numbers belong to one or more hunt groups. See the Administration Guide for Cisco Unified Communications Manager for information on hunt groups and hunt lists. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Perform one of the following tasks: a) To modify the fields for an existing phone, enter search criteria and choose a phone from the resulting list. The Phone Configuration window appears. b) To add a new phone, click Add New. The Add a New Phone window appears. Step 3 In the Phone Configuration window, perform one of the following tasks: a) To log out the phone from the hunt group, uncheck the Logged Into Hunt Group check box. b) To log in the phone to the hunt group, ensure that the Logged Into Hunt Group check box is checked. Note The Logged Into Hunt Group check box remains checked by default for all phones. Step 4 Click Save. Configure Hunt Group Service Parameter The Hunt Group Logoff Notification service parameter provides the option to turn audible ringtones on or off when calls that come in to a line group arrive at a phone that is currently logged out. This ringtone alerts Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 480 Receiving Calls Configure Phones for Hunt Group