/mcpStep 5 Click Save. Step 6 Perform one of the following tasks: • If you modified a Common Device Configuration that is already associated with devices, click Apply Config to restart the devices. • If you created a new Common Device Configuration, associate the configuration with devices and then restart them. Associate a Common Device Configuration with a Phone Before you begin Add Transfer Softkey Template to the Common Device Configuration, on page 496 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find and select the phone device to add the softkey template. Step 3 From the Common Device Configuration drop-down list, choose the common device configuration that contains the new softkey template. Step 4 Click Save. Step 5 Click Reset to update the phone settings. Associate Transfer Softkey Template with a Phone Optional. Use this procedure as an alternative to associating the softkey template with the Common Device Configuration. This procedure also works in conjunction with the Common Device Configuration. You can use it when you need to assign a softkey template that overrides the assignment in the Common Device Configuration or any other default softkey assignment. Before you begin Configure a Softkey Template for Transfer, on page 494 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find to select the phone to add the softkey template. Step 3 From the Softkey Template drop-down list, choose the template that contains the new softkey. Step 4 Click Save. Step 5 Press Reset to update the phone settings. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 497 Receiving Calls Associate a Common Device Configuration with a Phone