/mcpStep 5 Choose Configure Softkey Layout from the Related Links drop-down list in the upper right corner and click Go. Step 6 From the Select a Call State to Configure drop-down list, choose the call state for which you want the softkey to display. Step 7 From the Unselected Softkeys list, choose the softkey to add and click the right arrow to move the softkey to the Selected Softkeys list. Use the up and down arrows to change the position of the new softkey. Step 8 Repeat the previous step to display the softkey in additional call states. Step 9 Click Save. Step 10 Perform one of the following tasks: • Click Apply Config if you modified a template that is already associated with devices to restart the devices. • If you created a new softkey template, associate the template with the devices and then restart them. For more information, see Add a Softkey Template to a Common Device Configuration and Associate a Softkey Template with a Phone sections. Associate Softkey Template with Phone Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. The Find and List Phones window is displayed. Step 2 Find the phone to which you want to add the softkey template. Step 3 Perform one of the following tasks: • From the Common Device Configuration drop-down list, choose the common device configuration that contains the required softkey template. • In the Softkey Template drop-down list, choose the softkey template that contains the Barge or cBarge softkey. Step 4 Click Save. A dialog box is displayed with a message to press Reset to update the phone settings. Associate a Softkey Template with Common Device Configuration Optional. There are two ways to associate a softkey template with a phone: • Add the softkey template to the Phone Configuration. • Add the softkey template to the Common Device Configuration. The procedures in this section describe how to associate the softkey template with a Common Device Configuration. Follow these procedures if your system uses a Common Device Configuration to apply Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 522 Presence and Privacy Features Associate Softkey Template with Phone