/mcpStep 5 In the DND Option drop-down list, specify from the following options how you want the DND feature to handle incoming calls. • Call Reject—No incoming call information gets presented to the user. Depending on the configuration, the phone either plays a beep or displays a flash notification. • Ringer Off—Incoming call information gets presented to the device so that the user can accept the call, but the ringer is turned off. • Use Common Profile Setting—The Do Not Disturb setting for the Common Phone Profile that is specified for this device gets used. Note For 7940/7960 phones that are running SCCP, you can only choose the Ringer Off option. For mobile devices and dual-mode phones, you can only choose the Call Reject option. When you activate DND Call Reject on a mobile device or dual-mode phone, no call information gets presented to the device. Step 6 In the DND Incoming Call Alert drop-down list, specify from the following options how you want the phone to display an incoming call when DND is turned on. • None—The DND Incoming Call Alert setting from the Common Phone Profile gets used for this device. • Disable—For DND Ringer Off, both beep and flash notifications are disabled, but incoming call information is still displayed. For Call Reject, beep and flash notifications are disabled, and no incoming call information gets passed to the device. • Beep only—For incoming calls, the phone plays a beep tone only. • Flash only—For incoming calls, the phone displays a flash alert. Step 7 Click Save. What to do next Complete either of the following procedures: Configure a Do Not Disturb Feature Button, on page 561 Configure a Do Not Disturb Softkey, on page 563 Configure a Do Not Disturb Feature Button Follow these steps to add a Do Not Disturb feature button to your Cisco Unified IP Phone. Procedure Purpose Command or Action Create a phone button template that includes the Do Not Disturb button. Configure Phone Button Template for Do Not Disturb, on page 562 Step 1 Associate the Do Not Disturb button template to a phone. Associate a Button Template with a Phone, on page 251 Step 2 Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 561 Presence and Privacy Features Configure a Do Not Disturb Feature Button