/mcpPrivacy Configuration Task Flow Procedure Purpose Command or Action Generate a report to identify devices that support the Privacy feature. Generate a Phone Feature List, on page 5 Step 1 Enable Privacy by default for all the phones in the cluster. Enable Privacy Cluster-wide, on page 572 Step 2 Enable Privacy for specific devices. Enable Privacy for a Device, on page 572 Step 3 Configure Privacy phone button template for a device. Configure Privacy Phone Button Template, on page 573 Step 4 Associate the phone button template with a user. Associate Privacy Phone Button Template with a Phone, on page 574 Step 5 Configure the shared line appearance. Configure Shared Line Appearance, on page 574 Step 6 Configure Privacy on Hold. (Optional) Configure Privacy on Hold, on page 575 Step 7 Enable Privacy Cluster-wide Perform these steps to enable Privacy by default for the entire cluster. Procedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. The Service Parameter Configuration window appears. Step 2 From the Server drop-down list, choose the server that is running the Cisco CallManager service. Step 3 From the Service drop-down list, choose Cisco CallManager. Step 4 From the Privacy Setting drop-down list, choose True. Step 5 Click Save. Enable Privacy for a Device Before you begin Ensure that the phone model supports Privacy. For more information, see Generate a Phone Feature List, on page 5. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 572 Presence and Privacy Features Privacy Configuration Task Flow