/mcpProcedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Specify search criteria and click Find. The phone search results appear. Step 3 Select the phone. Step 4 From the Privacy drop-down list, select Default. Step 5 Click Save. Configure Privacy Phone Button Template Before you begin Enable Privacy for a Device, on page 572 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Phone Button Template. Step 2 Click Find to display list of supported phone templates. Step 3 Perform the following steps if you want to create a new phone button template; otherwise, proceed to the next step. a) Select a default template for the model of phone and click Copy. b) In the Phone Button Template Information field, enter a new name for the template. c) Click Save. Step 4 Perform the following steps if you want to add phone buttons to an existing template. a) Click Find and enter the search criteria. b) Choose an existing template. Step 5 From the Line drop-down list, choose feature that you want to add to the template. Step 6 Click Save. Step 7 Perform one of the following tasks: • Click Apply Config if you modified a template that is already associated with devices to restart the devices. • If you created a new softkey template, associate the template with the devices and then restart them. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 573 Presence and Privacy Features Configure Privacy Phone Button Template