/mcpAssociate Privacy Phone Button Template with a Phone Before you begin Configure Privacy Phone Button Template, on page 573 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find to display the list of configured phones. Step 3 Choose the phone to which you want to add the phone button template. Step 4 In the Phone Button Template drop-down list, choose the phone button template that contains the new feature button. Step 5 Click Save. A dialog box is displayed with a message to press Reset to update the phone settings. Configure Shared Line Appearance Before you begin Associate Privacy Phone Button Template with a Phone, on page 574 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. The Find and List Phones window appears. Step 2 To locate a specific phone, enter search criteria and click Find. A list of phones that match the search criteria is displayed. Step 3 Choose the phone for which you want to configure shared line appearance. The Phone Configuration window is displayed. Step 4 Click Add a new DN link in the Association Information area on the left side of the Phone Configuration window. The Directory Number Configuration window appears. Step 5 Enter the Directory Number and choose the Route Partition to which the directory number belongs. Step 6 Configure the remaining fields in the Directory Number Configuration window. For more information on the fields and their configuration options, see Online Help. Step 7 Repeat Step 3, on page 574 to Step 6, on page 574 for all the phones for which you want to create a shared line appearance. Note Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 574 Presence and Privacy Features Associate Privacy Phone Button Template with a Phone