McDewey

Step 2 In the Find and List Phones window, if you are adding an existing device, click Find and choose the device you want to configure from the list. If you are adding a new device, click Add New. Step 3 If you are adding a new phone, choose the type of phone you want to add from the Phone Type drop-down list and click Next. Step 4 In the Phone Configuration window, choose the ELIN group to which you want to add the device from the Emergency Location (ELIN) Group drop-down list. If you are adding a new device, fill out any other required fields. Step 5 Click Save. Enable Route Patterns and Translation Patterns Enable the Emergency Location (ELIN) service for a route pattern or a translation pattern. It is mandatory that you enable either route patterns or translation patterns, but it is possible to enable both. Note Before you begin Add Device to an Emergency Location Group, on page 641 Procedure Step 1 From Cisco Unified CM Administration, choose one of the following: • To enable a route pattern, choose Call Routing > Route/Hunt > Route Pattern. • To enable a translation pattern, choose Call Routing > Translation Pattern. Step 2 In the Find and List Route Patterns or Find and List Translation Patterns window, click Find and choose a route pattern or translation pattern from the list. Step 3 In the Route Pattern Configuration or Translation Pattern Configuration window, check the Is an Emergency Services Number check box. Note Check this check box only if you are using Emergency Call Handler and not another external emergency calling solution such as Cisco Emergency Responder. Step 4 Click Save. Bulk Administration of Emergency Location Groups and Phones • Bulk Administration of Emergency Location Groups and Phones Task Flow, on page 643 Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 642 Custom Features Enable Route Patterns and Translation Patterns