/mcpPurpose Command or Action Complete this task to enable Cisco Jabber users to search for enterprise groups in Microsoft Enable Enterprise Groups, on page 659 Step 2 Active Directory and add them to their contact lists. (Optional) If you want Cisco Jabber users to be able to search for and add security groups to their contact lists, complete this task flow. Enable Security Groups, on page 660 Step 3 (Optional) View enterprise groups and security groups that are synchronized with Cisco Unified Communications Manager database. View User Groups, on page 662 Step 4 Verify Group Sync from LDAP Directory Use this procedure to confirm that your LDAP Directory sync includes users and groups. Procedure Step 1 From Cisco Unified CM Administration, choose Server > LDAP > LDAP Directory. Step 2 Click Find and select the LDAP directory from which you are syncing enterprise groups. Step 3 Confirm that the Synchronize field has Users and Groups selected. Step 4 Complete any remaining fields in the LDAP Directory configuration window. For help with the fields and their settings, refer to the online help. Step 5 Click Save. Enable Enterprise Groups Configure the system to include enterprise groups in LDAP Directory syncs. Procedure Step 1 From Cisco Unified CM Administration, chooseSystem > Enterprise Parameters. Step 2 Under User Management Parameters, set the Directory Group Operations on Cisco IM and Presence parameter to Enabled. Step 3 Enter a value for the Maximum Enterprise Group Sized to allow Presence Information parameter. The permitted range is 1 to 200 users with a default value of 100 users. Step 4 From the Syncing Mode for Enterprise Groups drop-down list configure the LDAP sync that you want to perform at regular intervals: None, Differential Sync, Full Sync. Note Refer to the enterprise parameter help for additional assistance in configuring these fields. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 659 Custom Features Verify Group Sync from LDAP Directory