/mcpNotes Default Range Parameter Controls the headset's firmware upgrade source. By default, users can upgrade their headset through a devices and software connected to Unified CM or through a cloud-connected device or software. You can restrict your headsets to only accept firmware changes through a Unified CM source. Allow from UCM or Cisco Cloud Allow from UCM or Cisco Cloud (firmware will upgrade only), Restrict to UCM only (firmware may upgrade or downgrade) Firmware Source Controls the maximum distance between the Cisco Headset 560 Series and its base. By default, the bases have a DECT range of over 330 feet (100 meters) in ideal conditions. If you configure the DECT radio range to Medium Range or Short Range, the headset base consumes less power but users can't move as far from the base while on a call. Configure DECT radio range to Short Range for high density headset deployment. For more detailed information on DECT deployment, refer to the white paper on Cisco Headset deployment, How to Deploy DECT at Work for the Cisco Headset 560 Series. Medium Range Autorange, Medium Range, Short Range DECT Radio Range Controls how the Cisco Headset 560 Series behaves if you lift the headset off the base when you have an incoming call. On On, Off Headset dock behavior Configure a Headset and Accessories Template Use this procedure to configure a headset and accessories template with customized settings that you can apply to Cisco Headsets and Accessories. You can create a customized template or use the system-defined Standard Default Headset Template. The Standard Default Headset Configuration Template is a system-defined template. You can assign new User Profiles to the Standard Default Headset Template but you can't edit the template. By default, all user profiles are assigned to this template. To disassociate a user profile from this template, you must assign the profile to a new template. Note Procedure Step 1 From Cisco Unified CM Administration, choose Device > Headset and Accessories > Headset and Accessories Template. Step 2 Do either of the following: Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 681 Device Management Configure a Headset and Accessories Template