/mcpEnable Headset-based Extension Mobility Use this procedure to allow users to log in to Extension mobility from associated headsets. Before you begin Ensure that you configure Cisco IP Phones and device profiles to the extension mobility service that headset users can log in, use, and log out of Extension Mobility using a headset. For more information, see Subscribe to Extension Mobility, on page 408. Procedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. Step 2 From the Server field, choose the node running the Cisco Extension Mobility service. Step 3 From the Service field, choose Cisco Extension Mobility. Step 4 In the Headset-based Extension Mobility field, choose one of the following to use an associated headset for extension mobility login: • Choose Allow headset for Extension Mobility sign in and sign out to allow the headset user to sign in with extension mobility. By default, this parameter value is selected. • Choose Do not Allow headset for Extension Mobility sign in and sign out to restrict the headset user to sign in with Extension Mobility. If you choose this option, end users don't see the Extension Mobility login or logout screen when they connect their headsets. Step 5 Click Save. Enable Pinless Extension Mobility Login Use this procedure for pinless Extension Mobility login using a headset associated with a user. This feature is supported from release 12.5(1)SU3 onwards. Note Before you begin Specify the maximum duration the system waits for user input before automatically signing into the Extension Mobility profile in the Service Parameter Configuration > Auto login timer after headset connect (seconds) field. The specified maximum duration takes effect only when PIN entry for headset-based sign in field is set to Not Required. Note Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 692 Device Management Enable Headset-based Extension Mobility