/mcpProcedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. Step 2 From the Server field, choose the node running the Cisco Extension Mobility service. Step 3 From the Service field, choose Cisco Extension Mobility. Step 4 In the PIN entry for headset-based sign in field, choose one of the following to enable or disable pinless Extension Mobility login: • Choose Required to prompt the user to enter a PIN for Extension Mobility login. By default, this parameter value is selected. • Choose Not Required to automatically sign in the user within a minute to Extension Mobility. The user isn’t prompted to enter PIN details on the Phone UI. Important When the user automatically signs out within the set time or manually logged out using wired or wireless headset, we recommend the user to click Cancel to avoid automatic sign-in within the specified duration. Step 5 Click Save. Configure Extension Mobility Headset Logout Timer Use this procedure to configure the auto-logout timeout settings. If the Headset-based Extension Mobility service parameter in Service Parameter Configuration window is set to Do not Allow headset for Extension Mobility sign in and sign out, then configuring auto-logout timer value has no effect. Note Procedure Step 1 From Cisco Unified CM Administration, choose Service > Service Parameters. Step 2 From the Server field, choose the node running the Cisco Extension Mobility service. Step 3 From the Service field, choose Cisco Extension Mobility. Step 4 In the Auto logout timer after headset disconnect field, enter the maximum duration value that the system can wait for user input when the headset is disconnected from the device before automatically logging out the user. Note By default, the value is set for 5 minutes. You can set the maximum value to 15 minutes. Step 5 Click Save. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 693 Device Management Configure Extension Mobility Headset Logout Timer