/mcpHeadset Services End User Association Task Flow The end user can use the following task to associate the headset and use the associated identity to login using Extension Mobility. Procedure Purpose Command or Action Creates a headset association to the end user. Associate a User Headset, on page 694 Step 1 Allows skipping the headset association for the particular end user. Skip Headset Association, on page 695 Step 2 Enables customized experience to use an associated headset for Extension Mobility login. Extension Mobility Login Using Headset, on page 695 Step 3 Helps to logout the headset from Extension Mobility within the default set time. Logout User from Extension Mobility Using Headset, on page 696 Step 4 Associate a User Headset Use this procedure to assign the headset to a user. Procedure Step 1 Connect the headset to the Cisco IP Phone. The Associate headset to user popup screen appears on the IP Phone screen. The Username is automatically populated if the device is in a shared space or common area or user is associated with the device. If the device is anonymous, the User ID field is blank and any end user can associate the headset providing the user credentials. Step 2 Enter or modify User ID and PIN. Contact the administrator if you don’t know the credentials. Step 3 Click Submit. Successful associating of headset message is displayed along with the Username. If you enter invalid credentials (User ID or PIN) more than three times, the Cisco IP Phone displays an error message. If the headset association fails, you can disconnect and connect in the headset to provide valid credentials or contact the administrator. Step 4 (Optional) To associate headset manually through Cisco IP Phone, choose Settings > Accessories > Cisco Headset Setup > Associate User. Note Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 694 Device Management Headset Services End User Association Task Flow