/mcpProcedure Step 1 From Cisco Unified Serviceability, choose Tools > Service Activation. Step 2 From the Server drop-down list, select the publisher node and click Go. Step 3 Under CM Services, check Cisco CTI Manager. Step 4 Under CTI Services, check Self Provisioning IVR. Step 5 Click Save. Enable Autoregistration for Self-Provisioning Use this procedure for self-provisioning, you must configure the auto-registration parameters on the publisher. Procedure Step 1 In Cisco Unified CM Administration, choose System > Cisco Unified CM. Step 2 Click on the publisher node. Step 3 Select the Universal Device Template that you want to be applied to provisioned phones. Step 4 Select the Universal Line Template that you want to be applied to the phone lines for provisioned phones. Step 5 Use the Starting Directory Number and Ending Directory Number fields to enter a range of directory numbers to apply to provisioned phones. Step 6 Uncheck the Auto-registration Disabled on the Cisco Unified Communications Manager check box. Step 7 Confirm the ports that will be used for SIP registrations. In most cases, there is no need to change the ports from their default settings. Step 8 Click Save. Configure CTI Route Point Us this procedure to configure a CTI Route Point for the Self-Provisioning IVR. Procedure Step 1 From Cisco Unified CM Administration, choose, Device > CTI Route Points. Step 2 Complete either of the following steps: a) Click Find and select an existing CTI route point. b) Click Add New to create a new CTI route point. Step 3 In the Device Name field, enter a unique name to identify the route point. Step 4 From the Device Pool drop-down list, select the device pool that specifies the properties for this device. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 702 Device Management Enable Autoregistration for Self-Provisioning