McDewey

Before you begin Before you begin this procedure make sure that you have already synchronized Cisco Unified Communications Manager with a company LDAP directory. The LDAP synchronization must include a feature group template with universal line and device templates. Procedure Step 1 In Cisco Unified CM Administration, choose System > LDAP > LDAP Directory. Step 2 Click Find and select the LDAP directory to which the user is added. Step 3 Click Perform Full Sync. Cisco Unified Communications Manager synchronizes with the external LDAP directory. Any new end users in the LDAP directory are imported into the Cisco Unified Communications Manager database. What to do next If the user is enabled for self-provisioning, the end user can use the Self-Provisioning Interactive Voice Response (IVR) to provision a new phone. Otherwise, perform one of the following tasks to assign a phone to the end user: • Add New Phone for End User , on page 784 • Move an Existing Phone to a End User, on page 785 Add an End User Manually Perform the following procedure to add new end user and configure them with an access control group and a primary line extension. Make sure that you have already set up an access control groups that has the role permissions to which you want to assign your user. For details, see the "Manage User Access" chapter. Note Before you begin Verify that you have a user profile configured that includes a universal line template. If you need to configure a new extension, Cisco Unified Communications Manager uses the settings from the universal line template to configure the primary extension. Procedure Step 1 In Cisco Unified CM Administration, choose User Management > User/Phone Add > Quick User/Phone Add. Step 2 Enter the User ID and Last Name. Step 3 From the Feature Group Template drop-down list, select a feature group template. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 783 Advanced Call Processing Add an End User Manually