/mcpConfigure HTTPS Connection to APIC-EM Controller Use this procedure to set up an HTTP Profile to connect Cisco Unified Communications Manager to the APIC-EM Controller. In this connection, Cisco Unified Communications Manager acts as an HTTP user and the APIC-EM acts as the HTTP server. Procedure Step 1 From Cisco Unified CM Administration, choose Call Routing > HTTP Profile. Step 2 Enter a Name for the service. Step 3 Enter the User Name and Password for this HTTP connection. The user name does not have to be a configured end user in Cisco Unified Communications Manager, but the user name and password must match the values that are configured in the APIC-EM Controller. Step 4 In the Web Service Root URI text box, enter the IP address or fully qualified domain name of the APIC-EM service. Step 5 Configure any remaining fields in the HTTP Profile window. For help with the fields and their options, refer to the online help. Step 6 Click Save. Enable External QoS Service for System Enable External QoS Service for System Use this procedure to configure Cisco Unified Communications Manager to use an external service for QoS management. You must enable this service parameter in order to use an APIC-EM controller for QoS. Procedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. Step 2 From the Server drop-down list, select the publisher node. Step 3 From the Service drop-down list, select Cisco CallManager. Step 4 Set the value of the External QoS Enabled service parameter to True. Step 5 Click Save. Note To use the APIC-EM to manage call flows for devices, you must also enable external QoS within the SIP Profile for the device. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 810 QoS Management Configure HTTPS Connection to APIC-EM Controller