McDewey

Configure External QoS Service at SIP Profile Level If you have enabled the External QoS Enabled clusterwide service parameter, use this procedure to enable external QoS for SIP devices that use this SIP Profile. External QoS must be enabled at both the system level and in the SIP Profile to use the APIC-EM to manage QoS. Note Procedure Step 1 In Cisco Unified CM Administration, choose Device > Device Settings > SIP Profile. Step 2 Do one of the following: • Click Find and select an existing SIP Profile. • Click Add New to create a new SIP Profile. Step 3 Check the Enable External QoS check box. This check box must be checked for phones that use this SIP Profile to use the APIC-EM Controller to manage QoS. Step 4 Complete the remaining fields in the SIP Profile Configuration window. For help with the fields and their settings, see the online help. Step 5 Click Save. Assign SIP Profile to Phones Use this procedure if you want to assign the external QoS-enabled SIP Profile that you created to a phone. Use the Bulk Administration Tool to update the SIP Profile for a large selection of phones in a single operation. For details, see the Bulk Administration Guide for Cisco Unified Communications Manager. Tip Procedure Step 1 In Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find and select an existing phone. Step 3 From the SIP Profile drop-down list, select the SIP Profile that you updated for phones that will use the APIC-EM Controller to manage traffic. Step 4 Complete any remaining fields in the Phone Configuration window. For more information on the fields and their configuration options, see Online Help. Step 5 Click Save. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 811 QoS Management Configure External QoS Service at SIP Profile Level