/mcpStep 2 Perform one of the following tasks: a) Click Add New to configure new profile. b) Click Copy next to the VPN group that you want to copy an existing VPN group. c) Locate the appropriate VPN group and modify the settings to update an existing profile. Step 3 Configure the fields in the VPN Group Configuration window. For more information, see VPN Gateway Fields for VPN Client, on page 93 for the field description details. Step 4 Click Save. VPN Group Fields for VPN Client The table describes the VPN Group Fields for VPN Client. Table 12: VPN Group Fields for VPN Client Definition Field Enter the name of the VPN group. VPN Group Name Enter a description of the VPN group. VPN Group Description Scroll to see all available VPN gateways. All Available VPN Gateways Use the up and down arrow buttons to move available VPN gateways into and out of this VPN group. If the VPN client encounters critical error and cannot connect to a particular VPN gateway, it will attempt to move to the next VPN gateway in the list. Note You can add up to a maximum of three VPN gateways to a VPN group. Also, the total number of certificates in the VPN group cannot exceed 10. Selected VPN Gateways in this VPN Group Configure VPN Profile Use this procedure to configure the VPN Profile. Procedure Step 1 From Cisco Unified CM Administration, choose Advanced Features > VPN > VPN Profile. Step 2 Perform one of the following tasks: a) Click Add New to configure new profle. b) Click Copy next to the VPN profile that you want to copy an existing profile. c) To update an existing profile, specify the appropriate filters in the Find VPN Profile Where, click Find, and modify the settings. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 94 Remote Network Access VPN Group Fields for VPN Client