/mcpStep 3 Configure the fields in the VPN Profile Configuration window. For more information, see VPN Profile Fields for VPN Client, on page 95 for the field description details. Step 4 Click Save. VPN Profile Fields for VPN Client The table describes the VPN profile field details. Table 13: VPN Profile Field Details Definition Field Enter a name for the VPN profile. Name Enter a description for the VPN profile. Description When you check this check box, the VPN client can only run when it detects that it is out of the corporate network. Default: Disabled. Enable Auto Network Detect Enter the size, in bytes, for the Maximum Transmission Unit (MTU). Default: 1290 bytes. MTU This field specifies the amount of time to wait for login or connect operations to complete while the system creates the VPN tunnel. Default: 30 seconds Fail to Connect When you check this check box, the gateway certificate subjectAltName or CN must match the URL to which the VPN client is connected. Default: Enabled Enable Host ID Check From the drop-down list, choose the client authentication method: • User and password • Password only • Certificate (LSC or MIC) Client Authentication Method When you check this check box, a user password gets saved in the phone until either a failed log in attempt occurs, a user manually clears the password, or the phone resets or loses power. Enable Password Persistence Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 95 Remote Network Access VPN Profile Fields for VPN Client