/mcpDefault Field This field specifies the amount of time to wait for login or connect operations to complete while the system creates the VPN tunnel. Default: 30 seconds Minimum: 0 Maximum: 600 seconds Fail to Connect From the drop-down list, choose the client authentication method: • User and password • Password only • Certificate (LSC or MIC) Default: User And Password Client Authentication Method When True, a user password gets saved in the phone, if Reset button or “#” is used for reset. The password does not get saved and the phone prompts for credentials if the phone loses power or you initiate a factory reset. Default: False Enable Password Persistence When True, the gateway certificate subjectAltName or CN must match the URL to which the VPN client is connected. Default: True Enable Host ID Check Add VPN Details to Common Phone Profile Use this procedure to add VPN details to common phone profile. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Common Phone Profile. Step 2 Click Find and choose common phone profile to which you want to add the VPN details. Step 3 In the VPN Information section, choose the appropriate VPN Group and VPN Profile. Step 4 Click Save and then Apply Config. Step 5 Click OK in apply configuration window. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 97 Remote Network Access Add VPN Details to Common Phone Profile