McDewey

The default batch size equals 600 CDR or CMR records. The default sleep time between each CDR batch equals 2500 and 3000ms for each CMR batch. However you can, configure the batch size from the tbl_system_preferences table “LOADER_BATCH” column to have any value 50-2000. Note This section describes how to customize the loading schedule, how to restore the default loading schedule if it is customized, and how to disable CDR loading. Disable CDR loading when you are installing or upgrading the system. The CDR data does not get updated when CDR loading is disabled. Be sure to enable CDR loading again as soon as possible. The CAR tool does not affect the CDR generation in Unified Communications Manager. To manually delete the CAR data and reload the database with CDRs. Tip Procedure Step 1 Choose System > Scheduler > CDR Load. The CDR Load window displays. Step 2 Choose one of the following options: a) Disable Loader - To disable CDR data loading, check the Disable Loader check box and click Update. CDR data will not load into CAR until you enable CDR loading. Changes take effect at midnight. You can force the change to take effect immediately by stopping and restarting the CAR Scheduler service. To enable CDR data loading, uncheck the Disable Loader check box and continue with the next step to configure the load parameters. b) Continuous Loading 24/7 - To enable the CDR Loader to run continuously 24 hours a day, 7 days a week to load CDRs into the CAR database, check the Continuous Loading 24/7 check box and click Update. This choice represents the default setting for the CDR Load Scheduler. Note Under the default setting, only CDR records continuously load. The CMR records do not load. You must manually uncheck the Load CDR only check box to force the CMR records to continuously load with the CDR records. The CAR Scheduler service stops, and the CAR Loader, as configured, runs immediately (Within1-2minutes). The CAR Scheduler service restarts. If no new files for processing exist, the CDR Loader sleeps and then checks periodically for new files to be loaded. Note If this option is chosen, it takes over precedence and ignores the other CDR and CMR load parameters on the screen, such as Time, Loading Interval, Duration, and Uninhibited Loading. c) Load CDR Only - To load only CDR records into the CAR database, check the Load CDR only check box and click Update. Continue to the next step to configure the load parameters. With this option, CMR Call Reporting and Billing Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs 37 CDR Analysis and Reporting Set Up CDR Load Schedule