McDewey

TSP message to application data Action Line_Reply with Success LineInserviceEvent reports to Application Line_LineDevState Dwparam1 = x040, InService Application sends lineDevSpecific(CciscoLineDevSpecificPortRegistrationPerCall) with MediaCaps Info A: LINE_CALLSTATE (LINECALLSTATE_PROCEEDING) Application calls LineMakeCall() on A dialing a Party in Cluster2 A: LINE_CALLSTATE (LINECALLSTATE_CONNECTED) LINE_DEVSPECIFIC dwParam1 = compressionType & SLDSMT_OPEN_LOGICAL_CHANNEL dwParam2 = 0x00000xyy x (ninth Bit from LSB) – 1 – SetRTP (1-App has to set RTP / 0 – App need not set RTP) yy (8 bits) -IPAddressingMode Other Party answers the Call Line_Reply with Success Media will be Setup Application sends lineDevSpecific(CciscoLineDevSpecificSetRTPParamsForCall) with IPAddress and Port Inf0 Behavior is same and new SLDSMT_RTP_GET_IP_PORT Notification will not be fired to application. Variant 1: A – SCCP/SIP Phone Application Dynamically Registers IPV6 CTI Port with Early Offer Support Configuration A – CTI Port; CDC – IPV6 Only Cluster1 and Cluster2 connected via SIP trunk SIP trunk Supports Early Offer TSP message to application data Action Line_reply with Success Lines will be Enumerated to Application. lineInitialize Line_Open successful lineOpen() with Extversion – 0x800B0000 for Line A LineSetStatusMessages returns Success LineSetStatusMessages() – with dwLinestates – 0xcc Cisco Unified TAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 683 Message Sequence Charts Application Dynamically Registers IPV6 CTI Port with Early Offer Support