McDewey

TSP message to application data Action Line_Reply with Success Application sends lineDevSpecific(CciscoLineDevSpecificEnableFeatureSupport) with m_Feature – 0x00000001, m_Feature_Capability - 0x00000001 Line_Reply with Success Line_Reply with Success LineInserviceEvent will be repored to Application Line_LineDevState Dwparam1 = x040, InService Application sends lineDevSpecific(CciscoLineDevSpecificSetIPv6AddressAndMode) with MediaCaps Info Application sends lineDevSpecific(CciscoLineDevSpecificPortRegistrationPerCall) with MediaCaps Info Line_Reply with Success Application sends lineDevSpecific(CCiscoLineDevSpecificSetStatusMsgs) with m_DevSpecificStatusMsgsFlag=DEVSPECIFIC_GET_IP_PORT -0x00000400 A: LINE_CALLSTATE (LINECALLSTATE_PROCEEDING) Note SLDSMT_RTP_GET_IP_PORT Notification for IPV6 CTI Port is not supported. Application has to set the RTP info after OpenLogicalChannel Notification. Application calls LineMakeCall() on A dialing a Party in Cluster2 Call is routed through SIP trunk with Early Offer Enabled A: LINE_CALLSTATE (LINECALLSTATE_CONNECTED) LINE_DEVSPECIFIC dwParam1 = compressionType & SLDSMT_OPEN_LOGICAL_CHANNEL dwParam2 = 0x00000xyy x (ninth Bit from LSB) – 1 – SetRTP (1-App has to set RTP / 0 – App need not set RTP) yy (8 bits )-IPAddressingMode Other Party answers the Call Line_Reply with Success Media will be Setup Application sends lineDevSpecific(CciscoLineDevSpecificSetRTPParamsForCallIPv6) with IPAddress and Port Info Cisco Unified TAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 684 Message Sequence Charts Message Sequence Charts