McDewey

Expected events Action Park Status Event will be sent only to B not B'. At Step 4: Application will receive the LINE_CALLSTATE event with the Park Status = Parked. At Step 5: Application receives the LINE_CALLSTATE event with the Park Status = Reminder. At Step 6: Application receives the LINE_CALLSTATE event with the Park Status = Forwarded. Scenario 2: 1. The Park Monitoring message flag is Enabled using SLDST_SET_STATUS_MESSAGES request for Line B(3001). 2. The Park Monitoring Forward No retrieve destination configured as B(3001) 3. A(3000) calls B(3001) 4. B(3001) and B'(3001) starts ringing. B(3001)receives the call and parks the call 5. The Park Monitoring Reversion Timer Expires while the call is still parked. 6. The Park Monitoring Forward No Retrieve timer expires and call is forwarded to B(3001).Both B(3001) and B'(3001) starts ringing as they are shared lines. Application receive the LINE_CALLSTATE event with callstate IDLE. Application does a LineGetCallInfo. LineCallInfo contains the following: hline : LH = 1 dwCallID : CallID dwReason :LINECALLREASON_PARKED dwRedirectingIDName : TransactionIDID = Sub1. dwBearerMode: ParkStatus = 6 dwCallerID : ParkDN = 5555 dwCallerName : ParkDNPartition = P1 dwcalled : ParkedParty = 3000 dwCalledIDName : ParkedPartyPartition = P1. Park Status Event on C'. At Step 3: Application is notified about the New Parked call through LINE_NEWCALL event as the call is parked by the Normal TNP phone. Scenario 3: 1. The Park Monitoring message flag is Enabled using SLDST_SET_STATUS_MESSAGES request for Line B(3001). 2. A(3000) calls C(3002) 3. C(3002) and C'(3002) starts ringing. C'(3002) receives the call and parks the call 4. D(3003) retrieves the call Park Monitoring Feature Disabled Setup: Cisco Unified TAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 906 Message Sequence Charts Message Sequence Charts