/mcp• If you created a new Common Device Configuration, associate the configuration with devices and then restart them. Associate a Common Device Configuration with a Phone Before you begin Add Direct Transfer Softkey Template to the Common Device Configuration, on page 501 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find and select the phone device to add the softkey template. Step 3 From the Common Device Configuration drop-down list, choose the common device configuration that contains the new softkey template. Step 4 Click Save. Step 5 Click Reset to update the phone settings. Associate Direct Transfer Softkey Template with a Phone Optional. Use this procedure as an alternative to associating the softkey template with the Common Device Configuration. This procedure also works in conjunction with the Common Device Configuration. You can use it when you need to assign a softkey template that overrides the assignment in the Common Device Configuration or any other default softkey assignment. Before you begin Configure a Softkey Template for Direct Transfer, on page 499 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find to select the phone to add the softkey template. Step 3 From the Softkey Template drop-down list, choose the template that contains the new softkey. Step 4 Click Save. Step 5 Press Reset to update the phone settings. Configure Direct Transfer Button The procedures in this section describe how to configure the Direct Transfer button. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 502 Receiving Calls Associate a Common Device Configuration with a Phone