/mcpProcedure Purpose Command or Action Perform this step to assign Direct Transfer button features to line or speed dial keys. Configure Phone Button Template for Direct Transfer, on page 503 Step 1 Perform this step to configure the Direct Transfer button for a phone. Associate Direct Transfer Button Template with a Phone, on page 503 Step 2 Configure Phone Button Template for Direct Transfer Optional. Follow this procedure when you want to assign features to line or speed dial keys. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Phone Button Template. Step 2 Click Find to display list of supported phone templates. Step 3 Perform the following steps if you want to create a new phone button template; otherwise, proceed to the next step. a) Select a default template for the model of phone and click Copy. b) In the Phone Button Template Information field, enter a new name for the template. c) Click Save. Step 4 Perform the following steps if you want to add phone buttons to an existing template. a) Click Find and enter the search criteria. b) Choose an existing template. Step 5 From the Line drop-down list, choose feature that you want to add to the template. Step 6 Click Save. Step 7 Perform one of the following tasks: • Click Apply Config if you modified a template that is already associated with devices to restart the devices. • If you created a new softkey template, associate the template with the devices and then restart them. Associate Direct Transfer Button Template with a Phone Before you begin Configure Phone Button Template for Direct Transfer, on page 503 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 503 Receiving Calls Configure Phone Button Template for Direct Transfer