/mcpConfigure Forced Authorization Codes Procedure Purpose Command or Action Determine unique forced authorization codes that you want to use and add them to your system. Add Forced Authorization Codes, on page 602 Step 1 Enable forced authorization codes through a route pattern. Enable Forced Authorization Codes, on page 602 Step 2 Add Forced Authorization Codes Use this procedure to determine unique forced authorization codes that you want to use and add them to your system. To successfully route a call, the user authorization level must be equal to or greater than the authorization level that is specified for the route pattern for the call. Procedure Step 1 From Cisco Unified CM Administration, choose Call Routing > Forced Authorization Codes. Step 2 In the Authorization Code Name field, enter a unique name that is no more than 50 characters. This name ties the authorization code to a specific user or group of users. Step 3 In the Authorization Code field, enter a unique authorization code that is no more than 16 digits. Users enter this code when they place a call through an FAC-enabled route pattern. Step 4 In the Authorization Level field, enter a three-digit authorization level in the range of 0 to 255. Step 5 Click Save. Enable Forced Authorization Codes Use this procedure to enable forced authorization codes through a route pattern. Procedure Step 1 From Cisco Unified CM Administration, choose Call Routing > Route/Hunt > Route Pattern. Step 2 Perform one of the following tasks: • Click Find, and then choose a route pattern from the resulting list to update an existing route pattern. • Click Add New to create a new route pattern. Step 3 In the Route Pattern Configuration window, check the Require Forced Authorization Code check box. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 602 Custom Features Configure Forced Authorization Codes