/mcpStep 2 In the Generate Report field, choose a time as described in the following table. Table 42: Generate Report Fields Description Parameter Displays the average number of calls in the system for the chosen phone numbers for the date range that was chosen for an hour of the day. Note Ensure that the date and time range does not exceed one month. Hour of Day Displays the average calls in the system for the selected phone numbers for the date range that was chosen for the day of the week. Note Ensure that the date and time range does not exceed one month. Day of Week Displays the average calls in the system for the selected phone numbers for the date range that was chosen for the day of the month. Note Ensure that the date and time range does not exceed one month. Day of Month Step 3 In the Select Call Types area, check the check boxes for the types of calls that you want to include in the report. The following table describes the call types. Table 43: Traffic Summary (Phone Number) by Call Types Description Call Type Outgoing calls that originate on one Unified Communications Manager network, go out through a trunk, and terminate on a different Unified Communications Manager network. For CAR purposes, be aware that any outgoing call can be classified as an OnNet call if it is configured as such in the CAR dial plan configuration window. See Set Up Dial Plan, on page 31. On Net Calls, including intracluster calls, that originate in the Unified Communications Manager network and end in the same Unified Communications Manager network (no gateways or trunks are used). Internal Call Reporting and Billing Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs 108 CDR Analysis and Reporting Generate Traffic Summary by Phone Number Reports